Expert Waterproofing Services in Mount Juliet, TN — Licensed, Guaranteed, Fast
From basement flooding to foundation seepage, Arrow Tight Waterproofing has protected properties across Mount Juliet, TN with industrial-grade waterproofing systems. Call now — crews are standing by 24/7.
The Waterproofing Team Mount Juliet, TN Calls When It Matters
Arrow Tight Waterproofing was founded on one principle: a dry basement shouldn't be a luxury. Our crew of certified technicians covers Mount Juliet, TN with industrial waterproofing systems — the same membranes, drainage matting, and injection resins used in commercial construction, installed in your property at residential pricing.
Every technician on our team is IICRC-certified and carries full liability coverage. We pull permits where required, provide moisture readings before and after every job, and stand behind our work with a written warranty that transfers with the property.
✓ IICRC-Certified Waterproofing Technicians
✓ Commercial-grade materials on every residential job
✓ Permit-ready crews with full insurance documentation
✓ Transferable written warranty on all installed systems
8 Signs Your Mount Juliet Property Needs Waterproofing Right Now
Most basement floods don't start as floods. They start as these ignored details. If you see any of these in your Mount Juliet property, schedule a free inspection before the damage compounds.
1
Efflorescence on Block or Poured Walls
White powder on concrete means water has been migrating through your wall. The mineral deposits are left behind when water evaporates after passing through the block or poured wall.
2
Horizontal or Stair-Step Foundation Cracks
Vertical cracks are often settling. Horizontal cracks in block foundations indicate lateral soil pressure — a structural emergency, not just a cosmetic issue.
3
Musty Odor After Rain Events
Mold and mildew require only 24–48 hours of elevated moisture to colonize. A musty smell after rain means your vapor barrier has failed or doesn't exist.
4
Visible Seepage at Wall-Floor Joint
The cove joint — where the floor slab meets the foundation wall — is the most common water entry point in basement systems. Staining or pooling there means hydrostatic pressure is actively pushing in.
5
Peeling Paint or Bubbling Drywall
Paint and drywall absorb moisture vapor before you can see liquid water. Bubbling or peeling in a below-grade space is almost always a moisture problem, not a paint adhesion failure.
6
Sump Pump Running Constantly
A sump pump that cycles every few minutes — or runs non-stop — is managing a groundwater situation your current system wasn't designed for. It will burn out, and the next flood won't wait for a replacement.
7
Rust Stains on Concrete or Block
Rust streaks on foundation walls mean moisture is reaching and oxidizing the rebar or metal lath inside your block or poured concrete — water that deep is already compromising structural integrity.
8
Cracks in the Floor Slab
Hairline slab cracks that weep during wet weather indicate hydrostatic pressure building under the slab. Left alone, that pressure will widen the cracks and lift sections of the floor.
What We Do
Waterproofing Services We Provide in Mount Juliet, TN
Every moisture problem has a different source. We identify yours specifically before we quote anything — then we deploy the right system, not the most expensive one.
💧
Sub-Slab Interior Drainage Installation
When hydrostatic pressure is the primary culprit, the most effective long-term solution is a properly engineered interior drainage system. We install sub-slab perforated drain tile around the perimeter of your basement — capturing water before it can rise above slab level — and route it to a sump pit equipped with a dual-pump configuration.
These systems don't fight hydrostatic pressure — they redirect it.
Exterior Foundation Waterproofing & Membrane Application
Exterior waterproofing is the most comprehensive solution available — stopping water before it contacts your foundation wall. We excavate to the footing, apply a rubberized polymer membrane to the exterior foundation face, install dimple-mat drainage board, and backfill with clean crushed stone to redirect surface water away from the structure.
This approach solves the problem at the source: water never reaches your interior wall surface.
Poured concrete foundation cracks are repaired from the interior using high-pressure polyurethane or epoxy injection — the appropriate chemistry depends on whether the crack is actively leaking or dry. Polyurethane foam expands into wet, actively leaking cracks and cures flexible, accommodating minor future movement. Epoxy injection is used in dry cracks where structural bond restoration is the goal.
Block wall repointing involves removing deteriorated mortar joints to a minimum depth of 3/4 inch and repacking with waterproof hydraulic mortar.
Crawl Space Moisture Control: Encapsulation to Full Waterproofing
We install a minimum 20-mil reinforced poly vapor barrier over the entire crawl space floor and seal it up the walls to the sill plate — then seal all vents, install a conditioned air supply or dedicated crawl space dehumidifier, and spec a sump system if groundwater is present.
Encapsulation turns your crawl space from an uncontrolled dirt floor into a semi-conditioned space.
Sump Pump Installation, Replacement & Battery Backup Systems
A sump pump is only as reliable as its installation and backup plan. We install primary pumps — typically 1/2 to 3/4 HP cast iron submersibles with a minimum 10-year rating — alongside battery-operated backup systems that activate automatically when your primary pump fails or power goes out.
For finished basements and properties with high groundwater, we recommend a dual-pump system: a primary submersible at normal operating level and a pedestal backup set two inches higher.
Window Well Drainage & Egress Window Waterproofing
We excavate and regrade window wells to the proper dimension, install a gravel drain bed with a perforated pipe tied into your perimeter drainage system, and apply waterproof flashing around the window frame — stopping the entry point at the source instead of managing it inside.
Egress window installations create a significant opening in your foundation wall, and sealing the rough opening properly is as important as the window itself.
Why Mount Juliet Property Owners Choose Arrow Tight Waterproofing Over the Competition
We're not going to tell you we're the cheapest or the biggest. We're going to tell you what we actually do differently — and why it leads to better outcomes for your property and your wallet long-term.
01
We Diagnose Before We Quote
Every estimate begins with a physical inspection of every visible moisture entry point.
02
We Use the Same Products as Commercial Contractors
The waterproofing membrane we apply to your foundation is the same specification used on commercial buildings in TN — a 60-mil rubber barrier.
03
Fully Licensed Waterproofing Contractor in TN
Arrow Tight Waterproofing holds an active contractor's license in TN and carries $2M general liability plus workers' compensation on every crew member.
04
The Price We Quote Is the Price You Pay
We quote a fixed scope and a fixed price before any work begins.
05
Our Guarantee Goes With the House, Not the Homeowner
Our drainage system installations carry a written warranty against water intrusion through the protected area for the life of the system.
06
We Answer Emergency Calls Nights, Weekends, Holidays
Our emergency dispatch protocol means a technician assesses the situation within 60 minutes of your call in most of our TN service territory.
Call +1-866-476-1348 or fill out our contact form. A live dispatcher answers around the clock. We'll get your address and route a technician based on availability and urgency.
2
Technician Arrives — We Diagnose First
Your technician inspects the perimeter, scans the walls with thermal imaging, measures moisture content at every crack and stain, and maps the likely water path from grade to interior. This takes 45–90 minutes and is completely free.
3
You Get a Written Quote — No Pressure, No Surprises
The proposal covers every item: materials, drainage footage, labor, discharge routing, and any permit fee. The number on the proposal is the number on the invoice.
4
We Install, We Verify, We Warranty
{Our crew completes the installation to the approved scope. On completion, we conduct a post-installation moisture check, walk you through the system, and provide the written warranty documents registered to your property address.|Installation is completed by our direct-employee crew. We clean up the jobsite, verify pump function and discharge routing, take post-install moisture readings, and hand you the warranty documentation before we leave.}
Water Problems Don't Fix Themselves. We Do.
If you've noticed any of the warning signs above, the damage is compounding with every wet event. A free inspection costs you nothing; a delayed repair can cost thousands more.
What Mount Juliet, TN Homeowners Say About Arrow Tight Waterproofing
★★★★★
"The crew showed up within 3 hours of my call at 9 PM on a Tuesday. I had water coming in through a crack in my poured wall at the floor joint — had been watching it for two seasons and finally called when it started spreading. They installed an interior drain system along two walls and a new sump pit. The work took two days. I've had three major rain events since then — completely dry. Worth every dollar.Highly recommend the whole crew."
M
Michael R.Homeowner in Mount Juliet, TN
★★★★★
"I've had two other companies look at my foundation crack before these guys. Both gave me vague proposals and neither one could tell me exactly why I had water or where it was coming in. Arrow Tight Waterproofing came out, brought a thermal camera, and showed me on screen exactly where the moisture was concentrated. The polyurethane injection they did on the crack has held for 18 months now with zero seepage. That's the most competent inspection I've ever gotten from a contractor.I'd recommend them to anyone dealing with the same problem."
S
Sandra T.Property Owner
★★★★★
"I bought a house in Mount Juliet, TN knowing it had a moisture issue in the crawl space — previous owners had put down a thin plastic sheet that was doing nothing. Arrow Tight Waterproofing encapsulated the entire crawl space with a 20-mil liner, sealed the vents, and installed a dehumidifier. Within two weeks my downstairs floors stopped feeling cold and damp and the musty smell completely disappeared. The technician walked me through every step before starting. No surprises on the invoice.Highly recommend the whole crew."
D
David K.Homeowner in Mount Juliet, TN
★★★★★
"We had a window well that flooded every time we got more than an inch of rain. The well was filling up and water was coming straight in through the window sill joint. The fix was a regraded well with a perforated pipe tied into our existing interior drain. The whole job took one day. The crew was professional, cleaned up completely, and the well has handled every storm since without an issue.Highly recommend the whole crew."
L
Lisa M.Window Well Drainage Client in Mount Juliet, TN
★★★★★
"Called Arrow Tight Waterproofing after my old sump pump failed during a storm and I had 4 inches of water on my basement floor. They answered at midnight, arrived within an hour, and had a temporary pump running within 20 minutes of showing up. Once the emergency was managed, they walked me through a permanent drainage system upgrade. That was 8 months ago — I've had 6 rain events including one significant storm and the basement has stayed dry.Highly recommend the whole crew."
J
James W.Homeowner
★★★★★
"As a commercial property manager overseeing several buildings in Mount Juliet, TN, I've worked with a lot of waterproofing contractors. Arrow Tight Waterproofing is the first one that showed up to the initial walk with a written inspection checklist and completed it on-site before quoting. Every other contractor just eyeballed it and sent a number. Their exterior membrane on the building we had done 3 years ago is holding perfectly with zero callbacks.Highly recommend the whole crew."
A
Angela F.Multi-Property Client
Common Questions
Frequently Asked Questions About Waterproofing in Mount Juliet, TN
The distinction comes down to where the water pressure is coming from — interior drainage handles water at the cove joint and lower wall.
Crack injection: half a day to a full day. Interior perimeter drain system: 1–3 days for most residential basements.
A professionally waterproofed basement with a transferable warranty is a selling feature, not just a repair. It eliminates a mandatory disclosure item, removes a negotiation point for buyers, and makes finished basement space more credibly usable in appraisals.
Homeowner's policies typically cover sudden water damage — burst pipes, appliance failures — but exclude gradual seepage and groundwater intrusion. That said, we document every job with moisture readings and photographs.
There's no accurate ballpark without an inspection, because waterproofing scope varies drastically. A single crack injection and a full perimeter drainage system are both "waterproofing" — but they're completely different projects.
Damp-proofing is a coating — typically an asphalt-based spray applied to the exterior of a new foundation during construction. It slows vapor transmission but is not designed to withstand hydrostatic pressure; it cracks, deteriorates, and fails over time.
For interior work, displacement is rarely required. There will be concrete saw noise and dust during the initial saw-cut phase — we use HEPA-equipped dust containment systems — but most homeowners remain in the house throughout an interior drainage installation.
Poured concrete cracks primarily from shrinkage during initial cure, differential settlement as soil compacts beneath the footer, and thermal cycling over seasons. Concrete block cracks most commonly at mortar joints due to differential settlement or from lateral soil pressure.
Interior waterproofing work — drain tile installation, sump systems, crack injection — can be performed year-round regardless of weather.
A properly installed interior drainage system and sump pump system requires minimal maintenance, but that minimal maintenance matters. Test your sump pump every 6 months by pouring water into the pit.
Yes — and this is one of the most consistent findings in building science research. An unencapsulated crawl space with no standing water still pushes humid ground-sourced air into your living area through the stack effect: warm air rising out of the house pulls cool.
Service Area
Arrow Tight Waterproofing Serves All of Mount Juliet, TN — Including Mount Juliet
Arrow Tight Waterproofing provides Waterproofing services across the full extent of Mount Juliet, TN. Whether you're in a densely populated metro area or a rural property 40 miles from the nearest hardware store, our crews are dispatched from regional staging points to keep response times short and service costs predictable.
Our Mount Juliet team handles everything from single-family residential basements to commercial foundations. If you're in Mount Juliet, TN and have a water intrusion problem, we service your area. Call +1-866-476-1348 to confirm your address is covered — it almost certainly is.
Basement WaterproofingFoundation Crack RepairCrawl Space EncapsulationSump Pump SystemsExterior WaterproofingWindow Well DrainageEmergency ResponseCommercial Properties
